|
|
Grain Hopper Tanks - Farm
Wet holding bins need to be able to support slightly heavier loads
than typical ground feed bulk tanks. They are available in 9’, 12’, 15’,
18’ and 21’ diameters and can be used for temporary storage, adapted to
several grain drying and conditioning systems, or serve as long term
storage for properly dried grain. GSI hopper tanks are designed to hold
45 lbs. per cubic foot, with total bin capacities exceeding 6000 bu.
(150 metric tons). Optional view window level indicators can be added
for convenient monitoring of grain loading and unloading.
GSI precision formed, galvanized coated, high tensile steel sidewall
sheets, combined with a 2-2/3” (68mm) wide by 1/2” (13mm) deep
corrugation, provide outstanding strength and durability. Optional fully
die-formed side ladders with dimpled non-skid rungs provide convenient
access to the tank.
Legs and Anchors
GSI tanks are supported by our own unique, fully galvanized, 6-bend
roll-formed legs. GSI legs provide significantly greater strength over
simple angle iron legs and greater corrosion resistance and longer life
compared to painted legs. Galvanized roll-formed cross ties and
two-piece leg anchor sections assist in transferring the tank load to
the base and provide for greater strength, stability, and support.
Ribbed Roofing
GSI manufactures roofs from prime, high tensile, galvanized steel. The
higher tensile steel adds up to 20% more strength, with no extra weight,
which is critical in clear span roof structural design. Roof eave
clearance can be adjusted at the time of installation. Each roll formed
roof rib has four supportive bends in the vertical sides for maximum
strength. Tall roof ribs are fully double overlapped for moisture
resistance and additional support. The easy to open peak cap provides a
large 30” diameter opening for fast filling. Sealed roofs are also
available for your ground feed handling needs.
Hopper Bottoms
Tank hoppers are available in three slopes: 45°, for dry, free flowing
grain and 60° or 67° for harder flowing materials. Hopper panels are
die-formed with rounded corners and sealed edges down-turned for a
weather-tight fit. In addition, assembly with rounded, truss-head bolts
reduce ”bridging” of contents on inner surfaces.
The ”eave”, the upper edge where the hopper is joined to the
sidewall, is specially die-formed to conform to the shape of the
sidewall corrugation. Most other manufacturers depend on crimping and
bolt pressure to force the connection, which produces corrosion-prone
distortion and ”dimpling” of the sidewall. GSI’s industry exclusive
die-formed eave provides a much tighter seal and smoother flow of
material.
Straight Drop Boot 30° Drop Boot
Heavy Duty Boots
Multiple outlet requirements can be easily handled by our 22” (559mm)
all metal boot. This boot, which can be fitted to any GSI grain hopper
tank, will allow installation of up to four feed lines in several
directions at once.
GSI’s 16” (406mm) parabolic boot, available in straight drop or 30°
models, is made from the very latest in ultra high impact polypropylene
for greater flexibility, dependability and durability.
Specifications
|
|
|
|
Maximum Capacity |
Overall Height |
Diameter |
Rings |
Angle
of Hopper |
Bushel |
Cubic Feet |
Metric Tons |
U.S. Tons |
Feet |
Meters |
9' |
2 |
45° |
388 |
482.73 |
8.75 |
9.65 |
14'2" |
4.32 |
9' |
3 |
45° |
523 |
650.59 |
11.80 |
13.01 |
16'10" |
5.13 |
9' |
4 |
45° |
658 |
818.45 |
14.85 |
16.37 |
19'6" |
5.94 |
9' |
5 |
45° |
793 |
986.32 |
17.89 |
19.73 |
22'2" |
6.75 |
9' |
6 |
45° |
927 |
1,154.18 |
20.94 |
23.08 |
24'10" |
7.56 |
9' |
7 |
45° |
1,061 |
1,322.00 |
23.99 |
26.43 |
27'4" |
8.37 |
9' |
8 |
45° |
1,195 |
1,489.9 |
27.04 |
29.78 |
30'0" |
9.18 |
9' |
9 |
45° |
1,329 |
1,657.8 |
30.09 |
33.13 |
32'7" |
9.99 |
9' |
10 |
45° |
1,463 |
1,825.6 |
33.14 |
36.48 |
35'3" |
10.80 |
|
12' |
2 |
45° |
786 |
946.87 |
19.34 |
21.30 |
16'9" |
5.13 |
12' |
3 |
45° |
1,039 |
1,245.30 |
25.44 |
28.02 |
19'5" |
5.94 |
12' |
4 |
45° |
1,290 |
1,543.72 |
31.53 |
34.73 |
22'1" |
6.76 |
12' |
5 |
45° |
1,542 |
1,842.15 |
37.64 |
41.45 |
24'8" |
7.56 |
12' |
6 |
45° |
1,794 |
2,140.57 |
43.73 |
48.16 |
27'5" |
8.38 |
12' |
7 |
45° |
2,045 |
2,439.00 |
49.83 |
54.88 |
30'2" |
9.20 |
12' |
8 |
45° |
2,296 |
2,737.4 |
55.93 |
61.60 |
32'8" |
10.02 |
12' |
9 |
45° |
2,547 |
3,035.9 |
62.03 |
68.32 |
35'5" |
10.84 |
|
15' |
2 |
45° |
1,340 |
1,617.32 |
33.04 |
36.39 |
19'1" |
5.84 |
15' |
3 |
45° |
1,733 |
2,083.61 |
42.57 |
46.88 |
21'9" |
6.65 |
15' |
4 |
45° |
2,127 |
2,549.90 |
52.09 |
57.37 |
24'5" |
7.46 |
15' |
5 |
45° |
2,520 |
3,016.18 |
61.52 |
67.86 |
27'1" |
8.28 |
15' |
6 |
45° |
2,914 |
3,482.47 |
71.15 |
78.36 |
29'9" |
9.09 |
15' |
7 |
45° |
3,307 |
3,948.76 |
80.68 |
88.85 |
32'5" |
9.91 |
15' |
8 |
45° |
3,700 |
4,415.05 |
90.20 |
99.34 |
35'1" |
10.72 |
|
18' |
2 |
45° |
2,089 |
2,526.99 |
51.58 |
56.86 |
21'6" |
6.65 |
18' |
3 |
45° |
2,656 |
3,198.44 |
65.29 |
71.97 |
24'2" |
7.36 |
18' |
4 |
45° |
3,222 |
3,869.90 |
78.99 |
87.07 |
26'10" |
8.17 |
18' |
5 |
45° |
3,789 |
4,541.35 |
92.70 |
102.18 |
29'6" |
8.99 |
18' |
6 |
45° |
4,355 |
5,212.81 |
106.38 |
117.29 |
32'2" |
9.80 |
18' |
7 |
45° |
4,922 |
5,884.26 |
120.09 |
132.40 |
34'10" |
10.61 |
18' |
8 |
45° |
5,488 |
6,555.72 |
133.79 |
147.50 |
37'6" |
11.42 |
18' |
9 |
45° |
6,054 |
7,227.2 |
147.50 |
162.60 |
40'1" |
12.23 |
|
21' |
2 |
45° |
3,061 |
3,709.18 |
75.70 |
83.44 |
23'9" |
7.24 |
21' |
3 |
45° |
3,832 |
4,623.55 |
94.36 |
104.01 |
26'5" |
8.05 |
21' |
4 |
45° |
4,603 |
5,536.32 |
113.00 |
124.57 |
29'1" |
8.86 |
21' |
5 |
45° |
5,374 |
6,450.84 |
131.60 |
145.13 |
31'9" |
9.68 |
21' |
6 |
45° |
6,145 |
7,364.65 |
150.30 |
165.69 |
34'5" |
10.49 |
21' |
7 |
45° |
6,916 |
8,278.5 |
169.00 |
186.30 |
37'1" |
11.30 |
9’ Grain Hopper Tanks (GHT - 45 degree Hopper)
- Designed for the storage of free flowing material having a maximum density of 45 pounds per cubic foot.
- Bushel capacities are calculated with no compaction and to full cubic foot capacities.
- Weight capacities are calculated at 40 pounds per cubic foot.
12’ - 21’ Grain Hopper Tanks (GHT - 45 degree Hopper)
- Designed for the storage of free flowing material having a maximum density of 45 pounds per cubic foot.
- Bushel capacities are calculated with 5% compaction and at a 27-degree angle of repose.
- Weight capacities are calculated at 45 pounds per cubic foot.
|